Solar Automatic Drip Irrigation Kit System, JIYANG Solar Powered Auto Easy DIY Watering Device Supported Pots Plants, 12 Timing Modes with Anti-Siphoning Device (Supported 20-30 Pots, 12Timing Modes)

Price: $33.99
(as of Feb 28, 2025 04:35:25 UTC – Details)

Product Description

Solar Powered Automatic Drip Irrigation Kit-Manufacturer：Marvel Technology CO.,LTD

JIYANG Solar Drip Irrigation Kits Supported 30 Pots, 12Timing Modes for Plants

It’s powered by solar energy, can take water directly from containers such as buckets, without the need for a tap. It can automatically water your plants at preset time intervals and amounts, and will automatically alarm when the water pump is idling or water shortage in the container. A perfet designed for balconies, patios, small gardens without faucet and fixed power supply.

Features

1. Designed for balconies, patios, small gardens without faucet and fixed power supply.

2. Powered by solar energy, no need for additional wiring.

3. Taking water directly from containers such as buckets, without the need for a tap.

4. Auto watering at preset volume and time interval.

5. Audible alarm indicator for water shortage in the container.

6. Water tubing, T-Joint and Drip-Stakes are provided. You can layout as you need.

TIP–Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools.

Lightly soap end of selected T-Joint

Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.

What’s the best MODE for my plants?

Press the MODE to select the watering frequency. The blue indicator light shows from left to right one by one according to your press. For the first light, it will water once per 12 hours for 5 minutes. Press the MODE again, the light will jump into the light 2, the system will re-time and will water as it selected. The watering flow is about 600ml/min. There is 20 meter of Water Pipe with20 Drippers as the standard accessories. Please select the number of drippers and the watering frequency according to your actual water demand of plants. It’s very easy for you to DIY your own home automatic watering irrigation kit.

PACKING LIST

Solar Controller 1

Water Level Sensor 1

Water Filter 1

Tubing 10m 2

T-Joint 20

Drip-Stake 20

Ground Stake 1

Screw 2

Anti-Siphoning Device 1

Manual 1

Solar Pump dispenses approximately 600ml per minute. A 5- minute cycle will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes

What’s the best mode for my plants

Light-1 MODE as [Once per 12 hours for 5 minutes], will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes. Light-2 MODE as [Once per 12 hours for 15 minutes], will dispense about 2.4gal or 9 liters of water divided among the plant Drip-Stakes. Light-3 MODE as [Once per 12 hours for 20 minutes], will dispense about 3.2gal or 12 liters of water divided among the plant Drip-Stakes. Light-4 MODE as [Once per 24 hours for 5 minutes], will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes. Light-5 MODE as [Once per 24 hours for 15 minutes], will dispense about 2.4gal or 9 liters of water divided among the plant Drip-Stakes. Light-6 MODE as [Once per 24 hours for 20 minutes], will dispense about 3.2gal or 12 liters of water divided among the plant Drip-Stakes. Light-7 MODE as [Once per 48 hours for 10 minutes], will dispense about 1.6gal or 6 liters of water divided among the plant Drip-Stakes. Light-8 MODE as [Once per 48 hours for 15 minutes], will dispense about 2.4gal or 9 liters of water divided among the plant Drip-Stakes. Light-9 MODE as [Once per 48 hours for 30 minutes], will dispense about 4.8gal or 18 liters of water divided among the plant Drip-Stakes. Light-10 MODE as [Once per 72 hours for 10 minutes], will dispense about 1.6gal or 6 liters of water divided among the plant Drip-Stakes. Light-11 MODE as [Once per 72 hours for 15 minutes], will dispense about 2.4gal or 9 liters of water divided among the plant Drip-Stakes. Light-12 MODE as [Once per 72 hours for 30 minutes], will dispense about 4.8gal or 18 liters of water divided among the plant Drip-Stakes.

HOW TO INSTALL （You can put the Pipes into hot water for minutes, it does good help and make it easier to connect from drippers and the tees to the pipes.）

1. Solar Automatic Drip Irrigation Kit

ASSEMBLE SUPPLIES

· Water Tubing

· T-Joint

· Cup of hot water

· Soap

· Scissors

· Towel

2. Cut the Tubing into the Length as You Need

2-1). Arrange plants at desired positions.

2-2). Lay Main Line tubing in front of plants

2-3). Mark plant positions on Main Line water tube section (tape or bread ties)

2-4). Cut tubing with scissors at plant location

3. Connect the Tubing to the Water Inlet and Put the Water Filter into the water

*Be certain your plant containers / trays are LARGE ENOUGH to contain the programmed volume of water and water spillover will not cause damage to surroundings.

*Solar Pump dispenses approximately 8oz or 600ml per minute. A 5- minute cycle will dispense about 0.8gal or 3 liters of water divided among the plant Drip-Stakes.

*Audible alarm indicator when the water pump or the filter is blocked.

4. Connect anoter Tubing to the Water Outlet

TIP*- Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools.

Lightly soap end of selected T-Joint

Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.

5. T-Joint to Tubing/Access to Drip-Stake

5-1). Insert * T-Joints into Main Line water tubing at each plant position.

5-2). Arrange short Lateral Lines between water Main Line and plants.

5-3). Install end of Lateral Line onto Main Line T-Joint

5-4). Install Drip-Stake in other end of Lateral Line.

5-5). Insert Drip-Stake into plant

Note: Tube ends must be completely over T-Joint barb

6. Probe Connector/Put Water Sensor Probe into Water Container

*Water Container must be below level of plants

*Water Sensor Probe rests at bottom of water container.

*Audible alarm indicator for water shortage in the container.

7. Fix the Spin into Back of the Solar Controller

Ways of Installation

* Wall instabllation

* Ground plug installation

* Keep on table

8. Plug in the soil, keep on table or hang to the wall

Note:

8-1). Solar Controller must be above plant level and facing sun.

8-2). Solar Controller buttons must face toward the ground when installed.

9. Press ON/OFF and MODE to Select 6 Timer Modes(Light will show from left to right accordingly)

ON/OFF button – Program Start

MODE button – Program Interval & Volume – Blue LED on Solar Controller

Go for a happy long vacation.

It’s solar powered, and has the most power on the days water is needed most. It still functions after a few overcast days. 15-20 days duration after full charged. Just prepare a big container of water, select the watering frequency with the number of drippers. Then go for a happy long vacation.

Product Dimensions ‏ : ‎ 7.5 x 6.9 x 1.45 inches; 1.1 Pounds
Item model number ‏ : ‎ JYSOAUWT-30
Batteries ‏ : ‎ 1 Lithium Ion batteries required.
Date First Available ‏ : ‎ May 30, 2023
Manufacturer ‏ : ‎ JIYANG
ASIN ‏ : ‎ B0C3VNL29M
Country of Origin ‏ : ‎ China

Hassle-free watering: The Automatic Plant Watering Kit makes plant care easy and convenient by automatically watering your plants at preset time intervals and amounts. This means you don’t have to worry about manually watering your plants and can relax and enjoy your free time. A perfet designed for balconies, patios, small gardens without faucet and fixed power supply.
Efficient and eco-friendly: The kit is powered by solar energy and can take water directly from containers, making it an efficient and eco-friendly watering solution. Thanks to its solar-powered system and IP67 waterproof and sunlight resistance durable material, the kit is suitable for use both indoors and outdoors. It can work even during overcast days and comes with a ground stake for easy insertion into soil or screws for mounting on walls or fences.
Highly customizable: The kit’s 12 timer modes are highly customizable, allowing you to select the watering frequency and duration that best suit your plants’ needs. With the ability to support up to 30 pots, you can customize your setup to match the size and layout of your garden or patio. The watering flow is about 600ml/min, allowing you to select the number of drippers and watering frequency according to your actual water demand of plants.
Smart alarm system: The buzzer sounds twice a minute during the day. The green indicator light flashes without a beep at night. It’s maybe the water pump or the filter is blocked, please clean them. Or there is no water in the container, please add water. You can unclog the pump by injecting some warm water into the pump inlet with a syringe(not included). Please restart the product, and the system will perform a watering and re-time after the trouble shooting.
Long-lasting and convenient: The kit’s solar-powered system has the most power on the days water is needed most and can last up to 15-20 days after being fully charged. This means you can enjoy long vacations or periods of time away from home without worrying about your plants.
Top-notch after-sales service: Our team provides professional and reliable after-sales service, with extra replacement accessories and expansion kits available at our cost if needed. With our support, you can feel confident in your purchase and enjoy hassle-free plant care. NOTE：The Standard Accessories of full kit Comes with 20 Drip-Stakes. You can order The Expansion Kit or Extra Acessories Kit if you want to water plants up to 30 pots, or want to change a new DIY Setup.